Encoders Finder

PRODUCT FILTERS
PRODUCT FILTERS

10 products found

Keywords

The Model 25SP programmable Size 25 (63.5mm) Encoder package with servo and flange mounting options and count range up to 65,536 PPR.

  • Fully programmable with optional USB module or factory configured
  • Standard Size 25 package (63.5mm x 63.5mm)
  • Optical technology for high accuracy
  • Resolutions from 1 to 65,536 PPR (262,144 quadrature counts)
  • Servo and flange mounting
  • IP67 sealing available

Programmable 58mm thru-bore Encoder with a variety of flex mounts and up to 65,536 PPR.

  • Programmable with USB Module or Factory Configured when Ordered
  • Programmable Resolution from 1 to 65,536 PPR
  • Programmable Output Type and Wave Form
  • 58 mm package available in thru-bore or hollow bore
  • Standard and Metric Thru-Bore Sizes up to 5/8” and 15 mm
  • Several Flexible Mounting Options
  • IP67 Sealing Available

The Model 925 robust size 25 (63.5mm) absolute encoder with up to 12 bits with parallel outputs and IP67 sealing.

  • Standard Size 25 package (63.5 x 63.5)
  • Resolutions up to 12-bit (4096 counts)
  • Incorporates Opto-ASIC technology
  • Industrial grade, heavy duty housing
  • Optional IP65 seal

The Model 958 european size 58 (58 mm) absolute encoder with up to 12 bits with 26 Type or 20 Type mounting.

  • European Size 58 (58 mm) package
  • Resolutions up to 12-bit (4096 PPR equivalent)
  • Incorporates Opto-ASIC technology
  • Industrial grade, heavy duty housing
  • Wide range of operating voltages (4.75 to 24 Vcc)

The Model A25SB industrial multi-turn absolute encoder in 63.5mm package with IP67 sealing and serial communications.

  • Single Turn/Multi-Turn Absolute Encoder (16 Bit ST / 43 Bit MT)
  • SSI, CANopen, SAE J1939 or IO-Link Communication Protocol
  • Maintenance-Free and Environmentally Friendly Magnetic Design
  • Energy Harvesting Magnetic Multi-Turn Technology
  • No Gears or Batteries
  • IP67 Sealing Available
  • Servo and Flange Mounting
  • Standard Size 25 Package (63.5mm x 63.5mm)
  • Meets CE/EMC Standards for Immunity and Emissions
  • Replaces Model MA63S

The DR651 is a direct replacement encoder for the DRC 29L used for harsh industrial environments such as machine tools and robotics. Available with a variety of PPR’s and two connector orientations.

  • Rugged 50.8mm industrial encoder with 2.796” (71.01mm) servo hub
  • 3/8″ shaft with flat made from 303 stainless steel
  • Quadrature with index
  • Line Driver output
  • 5 to 28 VCC input voltage
  • Side or end mount 10-pin MS connector
  • Frequency up to 100kHZ
  • Sealing to IP66
  • Replaces DRC Model 29L

Designed as a drop-in replacement for the AMS Incremental Optical Encoders, the Model DR857 meets or exceeds all OEM specifications.

  • Standard 76.2mm round encoder body
  • Resolutions of 0256, 0500, 1000, 2000, and 4000 PPR available
  • 3/8” shaft made of 303 stainless steel
  • 5V Line Driver output
  • End-mount 10-pin MS connector
  • Precision ABEC ball bearings
  • IP66 sealing
  • Replaces AMS Controls incremental optical encoders
  • Adjustable encoder output A/B up to 120 pulses/mm
  • Reverse lock A/B channel for products temporary backward motion
  • Input correction factor for adjusting exact distances
  • Two freely programmable trigger outputs push/pull, NPN and PNP output with reversible signal level
  • Trigger and sequential trigger up to 6.5 m distance
  • Trigger block for freely adjustable distance
  • Standstill threshold (start/stop threshold) to filter out, for example, startup/shutdown ramps when starting up products (foils, etc.) and micro-vibrations in the movement pattern of products
  • Output for signal reversal on change of direction (traversing axes)
  • Two mutually monitoring sensors (failure, contamination)

TRP Tru-Trac, Programmable version of the Tru-Trac Linear Measurement Encoder

  • Resolutions from 1-100,000 *
  • Easily restore to factory settings and re-program to exact system requirements
  • Get up and running quick with easy to download programmer software **
  • Easily installed in a vertical, horizontal or upside down orientation
  • Operates over a variety of surfaces at speeds up to 3,000 feet (914 Metres) per minute
  • Provides the ability to choose exact PPR/CPR without changing the wheel size
  • Fast installation for mounting on any surface
  • Reduce cost and inventory for a more simplified system design
  • Uses the PR2 programmer and free software download

 

* High CPR settings may not always yield optimal results
** PR2 Programmer and software sold separately

  • Absolute Single-turn/Multi-turn shaft encoder
  • Sturdy design for rough applications
  • Miniature version
  • Bearingless “Kit Encoder“ version with external magnet
  • TBN: max. 65,536 steps/360°
  • TMN: max. 65,536 steps/rev. x 262,144 revolutions
  • TRN: max. 65,536 steps/rev. x 4096 revolutions
  • Protection grade IP65/IP66 (IP68/ IP69K optional)
  • CANopen Safety SIL2
  • CANopen (CiA DS 406 Encoder Profile, 4.1.0)
  • ATEX Variants for use in zone 1/21 and 2/22
Send Us What You See

Enter your keyword to search encoders, accessories, or information

Search
Search