Technical Bulletins & Manuals
Detailed instructions and technical information about product operation, maintenance, and troubleshooting. These documents serve as guides for users, technicians, and engineers.
- Full Guide for using the Programming software for EPC/BEPc models 25SP and 58TP
- Technical Information Reference Manual for use with BEPC/EPC CANopen Absolute Bus Encoders.
- EPC EtherCAT Interface Information Manual
- Technical Reference Manual for the EtherNET/IP Interface used in BEPC/EPC Encoders.
- Profinet Manual for use with BEPC/EPC Absolute Bus Encoders - Updated 2024
100 Series Technical Bulletins
The 100 series of bulletins describe EPC's technology and provide general technical information.
- Technical Bulletin Explaining what each section of BEPC's Part number means and why they are so long.
- Technical Bulletin Showing the Different Marker Gating Options Available on BEPC Encoders
- Technical Bulletin Explaining the Effects of Noise on Encoder Signals.
- Technical Bulletin Explaining Noise Suppresion Using Differential Signals.
- Technical Bulletin Showing The Sealing Options for BEPC Model Encoders.
- Technical Bulletin Explaining the Effects of Mechanical Jitter on Encoders.
- Technical Bulletin Explaining Using BEPC Encoders with Measuring Wheels.
- Technical Bulletin Specifying Different Output Types.
- Technical Bulletin Explaining the Converting between Single Ended and Differential Signals.
- Technical Bulletin (TB-111) for the M12 (12mm) Connector option.
- Technical Bulletin Explaining the Accuracy of BEPC Encoders.
- Technical Bulletin (TB-116) Detailing Noise and Signal Distortion Considerations.
- Technical Bulletin (TB-118) A Comparison Guide for the Differences Between the Model 725 and Model 725N.
- Technical Bulletin for Information on if a Modular Encoder is right for your Application.
- Technical Bulletin Containing Information on Gray Code, Natural Binary Codes and Conversions.
- Technical Bulletin Guidelines for Shaft and Bore Tolerances (g6 and H7)
500 Series Technical Bulletins
The 500 series of bulletins describe EPC’s technology and provide general technical information.
- Locking Collar Mounting Instructions for the Model 775 Encoder
- Clamp Shaft Mounting Instructions for Models 775 and 776 Encoders.
- Mounting Instructions for the Model 260 Encoder
- Flex mounting instructions for the 755HS Model Encoder
- Mounting Instructions for the 770 and 865T
- Technical Bulletin for Instructions for how to install the Model 121 Modular Encoder.
- Technical Datasheet describing Single Ended Encoder Driving over long distance for the RXTXD
- Technical Datasheet for the RXTXD - Showing Differential Encoder to Single Ended Device.
- Technical Datasheet for the RXTXD - Showing Single Ended Encoder to Differential Receiver.
- Technical Datasheet Showing Differential Encoder to Differential Receiver for the RXTXD
- Installation and Removal of the LCA Block on the Model LCE Linear Measurement Encoder.
- Installation and Removal Technical Bulletin for the model Tru-Trac (TR1) and Tru-TracPro (TRP) Linear Encoders.
- Technical Bulletin for how to insert the dust seal into the Model 121 Modular Encoder.
- Size 38mm Flex Mounting Instructions Technical Bulletin
- Technical Bulletin Explaining how to Install and Remove BEPC Magnetic Couplings.
- Installation Guide for the Model TR3 Heavy Duty Tru-Trac Encoder
- Technical Bulletin Explaining Variables that Generate Heat in an Encoder.
- Instructions for using the Cube Bracket
- Technical Bulletin featuring Information for Understanding BEPC/EPC SSI Encoders.
- Installation Instructions for the A36HB and A36SB SSI/CANopen Encoders.
- Information on when "SPEC779" Should be specified when replacing a RENCO Encoder with a BEPC Encoder.
- Installation Guide for using the three 90 Degree MS Connectors.
- Technical Bulletin (TB-537) A Quick Guide for Setting up the Programming Software for Models 25SP and 58TP.
- Technical Bulletin containing information on the installation of the Model A58HB and A58SB Encoders.
- Technical Bulletin Datasheet for Installation of Models 25T, 25H, 58TP and 58TF
- Ethernet Absolute Installation Manual for use with BEPc/EPC Encoders.
- A Quick Installation Guide for the Ethernet A58E Models of Encoder.
- A Quick start Installation Guide for the Model A58E Series of EtherCAT Encoders.
- Technical Bulletin TB-543 Documentation for Pivot Bracket Installation.
- Installation Guide for the Model LCX Draw Wire Hardware
- Technical Bulletin Quick Start Guide for the Absolute Model A36R Encoder.
- Document covering Wheel calculations for programming TRP Encoders
