When you have a machine down, you do not have time to waste. At BEPC, we understand that, so we offer popular configurations as Direct Replacement Encoders ready for Fast Delivery!

All Direct Replacement Encoders are the Accu-Coder™ brand and offer:

• The accuracy, reliability, and quality that only come from BEPC encoders
• Our industry-leading 3 year warranty
• FAST Delivery – standard delivery time is just 4 to 6 days, with expedite options on some models
• Huge savings compared to OEM prices

After decades of successfully cross-referencing and retrofitting thousands of domestic and off-shore encoders, we know what you need. And we can ship it out fast.

Incremental Encoder Model DR011

Categories: Direct Replacement Encoders, Encoders, Incremental Encoders

The DR011 is a direct replacement choice for the BEI EX152 encoder commonly used on postal sorting equipment, baggage systems, and packaging/conveying equipment.

High precision 38.1mm incremental encoder
1/4” OD stainless steel shaft
Quadrature A & B channels
1000 PPR
Push-Pull output
Servo mount encoder with 4 – 40 x 7.62mm deep mounting holes on 27.94mm bolt circle
457mm cable with strain relief
IP50 sealing
Shaft speeds up to 7500 RPM
Replaces BEI Model EX152

Incremental Encoder Model DR21R

Categories: Direct Replacement Encoders, Encoders, Incremental Encoders

The DR21R, with application-specific ABS stepped-voltage output channel, replaces select discontinued Renco RCH20D and RHS25D Models employed on the following legacy brushless servo motors: F, H, and W series (Allen-Bradley), N-Series (Electrocraft), and HSM-Series (Giddings & Lewis).

Line driver output with ABS stepped voltage output
Quadrature with index
5 VDC input voltage
End-mount 16-pin header connection
Operating temperature up to 100°C
Replaces select Renco models RCH20D and RHS25D encoders

Incremental Encoder Model DR274

Categories: Direct Replacement Encoders, Encoders, Incremental Encoders

The DR274 is a direct replacement for the encoder used with the Microcut Controller. BEPC originally manufactured these encoders so replacement are fast and easy.

High precision 38mm incremental encoder
Stainless steel 3/8” shaft
Quadrature A & B with reference channels
Resolution of 500 PPR
Line Driver output
4.5” (114mm) of cable with RJ45 phone jack
3-hole servo mount 120° apart
Replaces Microcut Controller on Perfecta printing presses

Incremental Encoder Model DR580

Categories: Direct Replacement Encoders, Encoders, Incremental Encoders

The DR580 is a direct replacement encoder used on Magnetek Vector/Invertor Motors. Available with PPR’s of 1024, 2048 and 2500 and two connector options, this DR is a superior replacement option.

Rugged 50.8mm industrial encoder with 2.25” (57.15mm) flex mount and 5/8” bore
Able to withstand temperatures up to 100° C
Quadrature with index
Line Driver output
5 to 28 VCC
10-pin inline or body mount MS connectors
Frequency up to 200 kHZ
IP64 sealing
Replaces Dynapar H23 encoders

Incremental Encoder Model DR651

Categories: Direct Replacement Encoders, Encoders, Incremental Encoders

The DR651 is a direct replacement encoder for the DRC 29L used for harsh industrial environments such as machine tools and robotics. Available with a variety of PPR’s and two connector orientations.

Rugged 50.8mm industrial encoder with 2.796” (71.01mm) servo hub
3/8″ shaft with flat made from 303 stainless steel
Quadrature with index
Line Driver output
5 to 28 VCC input voltage
Side or end mount 10-pin MS connector
Frequency up to 100kHZ
Sealing to IP66
Replaces DRC Model 29L

Incremental Encoder Model DR686

Categories: Direct Replacement Encoders, Encoders, Incremental Encoders

Drop in replacement for Siemens 1XP8001 Encoders.

Low profile 30.2mm encoder
2-piece construction; shaft screws into motor, then encoder attaches to shaft
1024 and 2048 PPR available
Line Driver output
Flex arm mounting system makes installation easy and allows for insulation and isolation from vibration
12-pin connector on 18” (457mm) cable
Advanced Opto-ASIC technology for superior noise immunity
Withstands temperatures up to 100°C
IP64 sealing
Replaces Siemens Model 1XP8001 encoders

Incremental Encoder Model DR735

Categories: Direct Replacement Encoders, Encoders, Incremental Encoders

The DR735 is a drop in replacement for the ROD320 encoder on Siemens* 1FT Series Simodrive* motors. Enhanced features include a “Stay In Place” tapered shaft.

Low profile 1.19” (30mm) encoder
2-piece construction
Unique “Stay in Place” shaft allows for easy removal of encoder
Resolutions of 1000, 1250, 2000, 2500, 3000, and 5000 PPR available
Line Driver output
Flex arm mounting system makes installation easy and allows for insulation and isolation from vibration
17-pin connector on 9” (228mm) cable
Advanced Opto-ASIC technology for superior noise immunity
Withstands temperatures up to 100°C
Replaces Heidenhain ROD320 encoders

Model DR857

Categories: Direct Replacement Encoders, Incremental Encoders

Designed as a drop-in replacement for the AMS Incremental Optical Encoders, the Model DR857 meets or exceeds all OEM specifications.

Standard 76.2mm round encoder body
Resolutions of 0256, 0500, 1000, 2000, and 4000 PPR available
3/8” shaft made of 303 stainless steel
5V Line Driver output
End-mount 10-pin MS connector
Precision ABEC ball bearings
IP66 sealing
Replaces AMS Controls incremental optical encoders

Encoders Catalogue