Encoders Finder

Filtered (7)
PRODUCT FILTERS
PRODUCT FILTERS

7 products found

  • N/A
  • N/A
Keywords
Show (7)
Cancel
model 25sp incremental programmable encoder

Incremental Encoder Model 25SP

Categories: , ,

The Model 25SP programmable Size 25 (63.5mm) Encoder package with servo and flange mounting options and count range up to 65,536 PPR.

  • Fully programmable with optional USB module or factory configured
  • Standard Size 25 package (63.5mm x 63.5mm)
  • Optical technology for high accuracy
  • Resolutions from 1 to 65,536 PPR (262,144 quadrature counts)
  • Servo and flange mounting
  • IP67 sealing available
View Product
programmable incremental encoder

Incremental Encoder Model 58TP

Categories: , ,

Programmable 58mm thru-bore Encoder with a variety of flex mounts and up to 65,536 PPR.

  • Programmable with USB Module or Factory Configured when Ordered
  • Programmable Resolution from 1 to 65,536 PPR
  • Programmable Output Type and Wave Form
  • 58 mm package available in thru-bore or hollow bore
  • Standard and Metric Thru-Bore Sizes up to 5/8” and 15 mm
  • Several Flexible Mounting Options
  • IP67 Sealing Available
View Product

Incremental Encoder Model DR011

Categories: , ,

The DR011 is a direct replacement choice for the BEI EX152 encoder commonly used on postal sorting equipment, baggage systems, and packaging/conveying equipment.

  • High precision 38.1mm incremental encoder
  • 1/4” OD stainless steel shaft
  • Quadrature A & B channels
  • 1000 PPR
  • Push-Pull output
  • Servo mount encoder with 4 – 40 x 7.62mm deep mounting holes on 27.94mm bolt circle
  • 457mm cable with strain relief
  • IP50 sealing
  • Shaft speeds up to 7500 RPM
  • Replaces BEI Model EX152
View Product

Incremental Encoder Model DR21R

Categories: , ,

The DR21R, with application-specific ABS stepped-voltage output channel, replaces select discontinued Renco RCH20D and RHS25D Models employed on the following legacy brushless servo motors: F, H, and W series (Allen-Bradley), N-Series (Electrocraft), and HSM-Series (Giddings & Lewis).

  • Line driver output with ABS stepped voltage output
  • Quadrature with index
  • 5 VDC input voltage
  • End-mount 16-pin header connection
  • Operating temperature up to 100°C
  • Replaces select Renco models RCH20D and RHS25D encoders
View Product

Incremental Encoder Model DR274

Categories: , ,

The DR274 is a direct replacement for the encoder used with the Microcut Controller. BEPC originally manufactured these encoders so replacement are fast and easy.

  • High precision 38mm incremental encoder
  • Stainless steel 3/8” shaft
  • Quadrature A & B with reference channels
  • Resolution of 500 PPR
  • Line Driver output
  • 4.5” (114mm) of cable with RJ45 phone jack
  • 3-hole servo mount 120° apart
  • Replaces Microcut Controller on Perfecta printing presses
View Product

Incremental Encoder Model DR686

Categories: , ,

Drop in replacement for Siemens 1XP8001 Encoders.

  • Low profile 30.2mm encoder
  • 2-piece construction; shaft screws into motor, then encoder attaches to shaft
  • 1024 and 2048 PPR available
  • Line Driver output
  • Flex arm mounting system makes installation easy and allows for insulation and isolation from vibration
  • 12-pin connector on 18” (457mm) cable
  • Advanced Opto-ASIC technology for superior noise immunity
  • Withstands temperatures up to 100°C
  • IP64 sealing
  • Replaces Siemens Model 1XP8001 encoders
View Product
tr1 tru-trac encoder with measuring wheel in black housing

Linear Encoder Model TRP Tru-TracPro™

Categories: , , ,

TRP Tru-Trac, Programmable version of the Tru-Trac Linear Measurement Encoder

  • Resolutions from 1-100,000 *
  • Easily restore to factory settings and re-program to exact system requirements
  • Get up and running quick with easy to download programmer software **
  • Easily installed in a vertical, horizontal or upside down orientation
  • Operates over a variety of surfaces at speeds up to 3,000 feet (914 Metres) per minute
  • Provides the ability to choose exact PPR/CPR without changing the wheel size
  • Fast installation for mounting on any surface
  • Reduce cost and inventory for a more simplified system design
  • Uses the PR2 programmer and free software download

 

* High CPR settings may not always yield optimal results
** PR2 Programmer and software sold separately

View Product
Send Us What You See

Enter your keyword to search encoders, accessories, or information

Search
Search
Close