Encoders Catalogue

Incremental Encoders

Incremental encoders are rotary or linear sensors that generate a series of pulses as they move, typically using two output channels to determine direction. They measure relative motion by counting these pulses from a known starting position, providing high resolution and speed measurement capabilities. Unlike absolute encoders, incremental encoders require a reference point or homing procedure to establish an initial position, as they don’t maintain absolute position information when powered off.

All Incremental Encoders

Designed as a drop-in replacement for the AMS Incremental Optical Encoders, the Model DR857 meets or exceeds all OEM specifications.

  • Standard 76.2mm round encoder body
  • Resolutions of 0256, 0500, 1000, 2000, and 4000 PPR available
  • 3/8” shaft made of 303 stainless steel
  • 5V Line Driver output
  • End-mount 10-pin MS connector
  • Precision ABEC ball bearings
  • IP66 sealing
  • Replaces AMS Controls incremental optical encoders

High accuracy programmable non-contact slip free optical encoder.

  • Adjustable encoder output A/B up to 120 pulses/mm
  • Reverse lock A/B channel for products temporary backward motion
  • Input correction factor for adjusting exact distances
  • Two freely programmable trigger outputs push/pull, NPN and PNP output with reversible signal level
  • Trigger and sequential trigger up to 6.5 m distance
  • Trigger block for freely adjustable distance
  • Standstill threshold (start/stop threshold) to filter out, for example, startup/shutdown ramps when starting up products (foils, etc.) and micro-vibrations in the movement pattern of products
  • Output for signal reversal on change of direction (traversing axes)
  • Two mutually monitoring sensors (failure, contamination)

The Tr1 Tru-Trac™ – encoder, measuring wheel & spring-loaded torsion arm in one unit.

  • Encoder and measuring wheel solution integrated into one compact unit
  • Spring-loaded torsion arm makes wheel pressure adjustments a snap
  • Easily installed in a vertical, horizontal or upside down orientation
  • Operates over a variety of surfaces at speeds up to 3000 feet per minute
  • Integrated module simplifies your system design, reducing cost

The Model TR3 Heavy Duty Tru-Trac,  complete measuring wheel solution encoder with optional dual wheels.

  • Integrated heavy duty encoder and measuring wheel in one
  • Spring-loaded torsion arm for quick wheel pressure adjustments
  • Easily installed in a vertical, horizontal or upside down orientation
  • Operates over a variety of surfaces at speeds up to 3000 feet per minute
  • Integrated module simplifies system design, reducing cost

TRP Tru-Trac, Programmable version of the Tru-Trac Linear Measurement Encoder

  • Resolutions from 1-100,000 *
  • Easily restore to factory settings and re-program to exact system requirements
  • Get up and running quick with easy to download programmer software **
  • Easily installed in a vertical, horizontal or upside down orientation
  • Operates over a variety of surfaces at speeds up to 3,000 feet (914 Metres) per minute
  • Provides the ability to choose exact PPR/CPR without changing the wheel size
  • Fast installation for mounting on any surface
  • Reduce cost and inventory for a more simplified system design
  • Uses the PR2 programmer and free software download

 

* High CPR settings may not always yield optimal results
** PR2 Programmer and software sold separately

The Model 15S Accu-Coder® Is a Low profile 38.1mm diameter incremental shaft encoder with commutation and multiple Flange, Servo and Face mounting options.

  • Very high performance economical encoder
  • Low profile—less than 25.4 mm height and 38 mm diameter
  • Extended temperature operating ranges available
  • Up to 12-pole commutation optional (for brushless motor control)

The model 260 Accu-Coder® is a high performance and versatile encoder with multiple configuration options.

  • Low profile 30.3mm
  • Up to 12 pole commutation
  • Thru-bore and hollow bore (blind) styles
  • Simple, innovative flexible mounting system
  • Incorporates Opto-ASIC technology

Model 725 size 25 (63.5mm) encoder package with servo and flange mounting up to 30,000 PPR.

  • Standard Size 25 package (63.5 x 63.5)
  • Up to 30,000 PPR
  • Standard and industrial housings
  • Servo and flange mounting
  • IP67 sealing available

Model 758 size 58 (58 mm) incremental encoder with both 26 Type and 20 Type flange mount options.

  • Standard Size 58 mounting (58 mm diameter)
  • Up to 30,000 PPR
  • 36 Kg max. Axial and radial shaft loading
  • High temperature option (100° C)
  • IP65 sealing available
Send Us What You See

Enter your keyword to search encoders, accessories, or information

Search
Search