Encoders Finder

Filtered (9)
PRODUCT FILTERS
PRODUCT FILTERS

9 products found

  • N/A
Keywords
Show (9)
Cancel
incremental thru bore motor mount encoder

Incremental Encoder Model 15T & 15H

Categories: , ,

The Model 15T/H Accu-Coder® is a Low profile 38.1mm diameter Encoder with commutation and multiple flex mounts.

 

  • Very high performance economical encoder
  • Low profile—25.4 mm height and 38 mm diameter
  • Thru-bore with sizes up to 10 mm
  • Simple, innovative flex mounting system (Global Mounting Standards)
  • Up to 12 pole commutation optional for brushless motor control
View Product
model 25sp incremental programmable encoder

Incremental Encoder Model 25SP

Categories: , ,

The Model 25SP programmable Size 25 (63.5mm) Encoder package with servo and flange mounting options and count range up to 65,536 PPR.

  • Fully programmable with optional USB module or factory configured
  • Standard Size 25 package (63.5mm x 63.5mm)
  • Optical technology for high accuracy
  • Resolutions from 1 to 65,536 PPR (262,144 quadrature counts)
  • Servo and flange mounting
  • IP67 sealing available
View Product
programmable incremental encoder

Incremental Encoder Model 58TP

Categories: , ,

Programmable 58mm thru-bore Encoder with a variety of flex mounts and up to 65,536 PPR.

  • Programmable with USB Module or Factory Configured when Ordered
  • Programmable Resolution from 1 to 65,536 PPR
  • Programmable Output Type and Wave Form
  • 58 mm package available in thru-bore or hollow bore
  • Standard and Metric Thru-Bore Sizes up to 5/8” and 15 mm
  • Several Flexible Mounting Options
  • IP67 Sealing Available
View Product
model 760 incremental thru bore motor mount encoder

Incremental Encoder Model 760

Categories: , ,

The model 760 – Size 25 / 63.5mm Diameter Thru and Blind Bore Encoder.

  • Size 25 / 63.5mm Diameter (Hollow Shaft)
  • Up to 12 Pole Commutation Available
  • Thru Bore and Blind Bore Options
  • Simple, Innovative Flexible Mounting System
  • Incorporates Opto-ASIC Technology
View Product

Incremental Encoder Model DR21R

Categories: , ,

The DR21R, with application-specific ABS stepped-voltage output channel, replaces select discontinued Renco RCH20D and RHS25D Models employed on the following legacy brushless servo motors: F, H, and W series (Allen-Bradley), N-Series (Electrocraft), and HSM-Series (Giddings & Lewis).

  • Line driver output with ABS stepped voltage output
  • Quadrature with index
  • 5 VDC input voltage
  • End-mount 16-pin header connection
  • Operating temperature up to 100°C
  • Replaces select Renco models RCH20D and RHS25D encoders
View Product

Incremental Encoder Model LP1 Accu-LaserPro Encoder

Categories: , ,
  • Adjustable encoder output A/B up to 120 pulses/mm
  • Reverse lock A/B channel for products temporary backward motion
  • Input correction factor for adjusting exact distances
  • Two freely programmable trigger outputs push/pull, NPN and PNP output with reversible signal level
  • Trigger and sequential trigger up to 6.5 m distance
  • Trigger block for freely adjustable distance
  • Standstill threshold (start/stop threshold) to filter out, for example, startup/shutdown ramps when starting up products (foils, etc.) and micro-vibrations in the movement pattern of products
  • Output for signal reversal on change of direction (traversing axes)
  • Two mutually monitoring sensors (failure, contamination)
View Product
tr1 tru-trac encoder with measuring wheel in black housing

Linear Encoder Model TRP Tru-TracPro™

Categories: , , ,

TRP Tru-Trac, Programmable version of the Tru-Trac Linear Measurement Encoder

  • Resolutions from 1-100,000 *
  • Easily restore to factory settings and re-program to exact system requirements
  • Get up and running quick with easy to download programmer software **
  • Easily installed in a vertical, horizontal or upside down orientation
  • Operates over a variety of surfaces at speeds up to 3,000 feet (914 Metres) per minute
  • Provides the ability to choose exact PPR/CPR without changing the wheel size
  • Fast installation for mounting on any surface
  • Reduce cost and inventory for a more simplified system design
  • Uses the PR2 programmer and free software download

 

* High CPR settings may not always yield optimal results
** PR2 Programmer and software sold separately

View Product
model 15s incremental shaft encoder

Incremental Encoder Model 15S

Categories: , ,

The Model 15S Accu-Coder® Is a Low profile 38.1mm diameter incremental shaft encoder with commutation and multiple Flange, Servo and Face mounting options.

  • Very high performance economical encoder
  • Low profile—less than 25.4 mm height and 38 mm diameter
  • Extended temperature operating ranges available
  • Up to 12-pole commutation optional (for brushless motor control)
View Product
model 260 encoder, incremental encoder, thru bore motor mount encoder

Incremental Encoder Model 260

Categories: , ,

The model 260 Accu-Coder® is a high performance and versatile encoder with multiple configuration options.

  • Low profile 30.3mm
  • Up to 12 pole commutation
  • Thru-bore and hollow bore (blind) styles
  • Simple, innovative flexible mounting system
  • Incorporates Opto-ASIC technology
View Product
Send Us What You See

Enter your keyword to search encoders, accessories, or information

Search
Search
Close