Programming module for use with the Model TRP Programmable Encoder
Programmer for the TRP Tru-TracPro™ Encoder (Sold Separately)
Available in three versions, terminal block for flying lead cables, M12 8-pin, and M12 5-pin, the PR2 programmer connects to computer via USB C to USB A cable and uses software that can be downloaded directly from the Encoder Products website. The programmer software includes tools for calculating:
• CPR, RPM, & Frequency
• Measuring Wheel – PPR/CPR, Linear Resolution, Wheel Circumference
• Measuring Wheel – PPR/CPR, Wheel Circumference, Pulses per Unit
Position Data and Calibration is also available in the software. The PR2 also features a QR code on the label that brings the user to a product page with software download, technical troubleshooting and product registration information.
The latest Software can be downloaded below in the downloads section, The PR2 Manual can be downloaded above by clicking the datasheet button.OS for software is Windows 10 or 11 (may run on Windows 7 but not tested) .Net Framework 4.6 or Higher required for Windows 10 if not previously installed.
PR2-001-J / PR2-001-K / PR2-001-T
Latest Version of the Programmer Software (V1.9.0.0)
PR2 Programmer Manual
If you’ve got a technical question, our engineers are on-hand to answer your questions and help you choose the right encoder to meet your needs.
