Connectors & Cables Assembly

Connectors & Cables

Your BEPC encoder is designed to produce a clean, stable and reliable signal in a variety of operating conditions.  To ensure that your encoder signal reaches its intended destination—be it a counter, PLC or controller—use genuine BEPC cables and connectors.  Our shielded cable and mating connectors have been tested to meet stringent standards for quality and performance.  All cable assemblies are assembled in our in-house cable department in accordance with industry best practices.

BEPC cable and mating connector assemblies (6-pin, 7-pin, 10-pin and 12-pin) can be ordered to your specified length and with the proper Encoder pin-out.  Also, both encoder cable and mating connectors can be ordered separately.  Our 5-pin and 8-pin M12 cord sets are available in a variety of lengths.  If you don’t see the length you need, contact Customer Service as other options may be available.

Mating Connectors

Order Code​

Description

C04

4 Pin Hirschmann Connector

 

C05​

5 Pin M12 Connector

 

C06​

6 Pin MS Connector

 

C07​

7 Pin MS Connector

 

C08​

8 Pin M12 Connector

 

C09​

9 Pin “D” Connector

 

C10​

10 Pin MS Connector

 

C12 & C16​

12 and 16 Pin MS Connectors

 

C17

19 Pin MS Connector

 

080533​

6 Pin MS 90 Degree Connector (see TB533 for Installation Guidelines)

 

080534​

7 Pin MS 90 Degree Connector (see TB533 for Installation Guidelines)

 

080535​​

10 Pin MS 90 Degree Connector (see TB533 for Installation Guidelines)

 

 

 

 

 

 

 

AWG 24, Hi-Temp 105° C, Double Shielded Cable Assemblies​

To order a pre-wired cable and connector assembly, indicate the connector style, cable length and output configuration. All cable is 24 gauge double-shielded and rated to 105° C.

For wiring information on this cable, refer to the wiring table in the datasheet for your encoder.

Example: STD-C10-G2-HV-R-758 Option A Wiring​
This is a Standard Cable with a C10 MS Connector , 2 metres Cable length, HV Output with all the channels and wired to match the 758 Encoders Option “A” wiring.

STD

Standard Cable

Connector Type

None

C04 4 Pin Hirschmann Connector (Female)

C05 5 Pin M12 Connector (Female)

C06 6 Pin MS Connector (Female)

C07 7 Pin MS Connector (Female)

C08 8 Pin M12 Connector (Female)

C09 9 Pin “D” Connector (Female)

C10 10 Pin MS Connector (Female)

C12 12 Pin MS Connector (Female - specify CW or CCW)

 

Cable Length

GX​ X = Length of Cable in Metres (Example G2 = 2 Metres)

 

 

Output Type

HV  High Voltage Line Driver

OC Open Collector

PP Push-Pull

 

Channels​

A Single Channel (A)

R Quadrature and Index (A,B &Z)

Q Quadrature (A&B)

 

Wiring Detail

Specify the Encoder model and wiring option here to match the cable with your encoder – Please refer to the datasheet for your model encoder for more details. Example: 758 Option “A” Wiring
 

 

 

 

 

 

AWG 28, Shielded, Rated to 70° C​

ABS

Absolute Cable

 

 

Connector Type

None

C16 16 Pin MS Connector

C19 17 Pin MS Connector

Cable Length​

GX  X = Length of Cable in Metres (Example G2 = 2 Metres)

Wiring Detail​

Specify the Encoder model and wiring option here to match the cable with your encoder – Please refer to the datasheet for your model encoder for more details. Example: 958 16 Pin

 

 

 

 

 

 

 

 

 

 


DOCUMENTATION

  Connectors and Cable Assemblies
  TB-111 M12 (12 mm) Connector
  TB-533 Installation of 90° Connector When Rotation Is Necessary

 

 

Questions?